AED 10.50
Description
The main function or use of Solder Paste Flux Grease ZJ-18 in any PCB Soldering or repairing is to clean and remove any oxide from the board. These oxides which can be on the board may not result in good solder joints. If the solder joint, is not well soldered, there will be poor electrical conduction or poor flow of electricity through the circuit.
Solder Paste Flux Grease ZJ-18 helps to de-oxidize metals (copper tracks on the PCB and leads of electronic components) and helps better soldering. The good thing in the flux promotes the wetting of the molten solder to the SMD and DIP leads by removing oxides and other surface contaminants.
Specifications:
Rosin flux ZJ-18 is used in hand soldering.
the container has 100g
PH neutral 7 ± 0.3
the flux increases the melted solder
cleans and prevents oxidation
no poison