ESP32CAM is a development board for image recognition. It features an ESP32(4M Flash + 520K RAM) chip and a 2-Megapixel camera(OV2640). It also supports image transmission via Wi-Fi and debugging through USB Type-C port.

The hardware comes preloaded software, programmed by ESP-IDF. It is an application to run a Wi-Fi camera. The output image is size 600*800 since it's a 2-Maga camera, you sure can optimize the software to output the maximum size of photos.

what this software can do?

• Power the board via USB type-C or GROVE
• Use your phone to Wi-Fi scan an AP name start with 'm5stack-' and click to connect this AP.
• Open up the web browser on your phone and visit 192.168.4.1
• Then here comes the picture. Video is about 5-6 frames per second. not super fast.

The hardware also comes with some reserved weld pad, just If you won't put these chips back on board.

• 9-axis gyroscope (MPU6050)
• pressure sensor (BME280)
• analog MIC (SPQ2410)
• Lipo Battery power pins

Product Features:

• ESP32 specifications
  • Dual-core Tensilica LX6 microprocessor
  • Up to 240MHz clock frequency
  • 520KB internal RAM
  • 4MB Flash memory
  • Integrated 802.11 BGN WiFi transceiver
  • Integrated dual-mode Bluetooth (classic and BLE)
  • Hardware-accelerated encryption (AES, SHA2, ECC, RSA-4096)
• CP2104 USB TTL
• ESP32 chipset + 3D Antenna
• OV2640 sensor
  • Output Formats(8-bit):
    • YUV(422/420)/YCbCr422
    • RGB565/555
    • 8-bit compressed data
    • 8-/10-bit Raw RGB data
  • Maximum Image Transfer Rate
    • UXGA/SXGA: 15fps
    • SVGA: 30fps
    • CIF: 60fps
  • Scan Mode: Progressive
• Camera specifications
  • Field of View: 65 degree
  • Maximum Pixel: 2M
• Size: 20.5 × 46.5 × 11.5mm
• Product Size: 46.5mm x 19.5mm x 11.7mm
• Product weight: 6.3g

Package Include:

• 1x ESP32CAM Unit

•  

  
  

  you can use this product with EasyLoader :

  1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader.
  
  2. After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click "Burn" to start burning.
  
  3. The CP210X (USB driver) needs to be installed before the EasyLoader is a burner.

  Pins Map:

  Camera Interface PinMap

  Interface	OV2640 Pin	ESP32Cam
  SCCB Clock	SIOC	IO23
  SCCB Data	SIOD	IO25
  System Clock	XCLK	IO27
  Vertical Sync	VSYNC	IO22
  Horizontal Reference	HREF	IO26
  Pixel Clock	PCLK	IO21
  Pixel Data Bit 0	D2	IO17
  Pixel Data Bit 1	D3	IO35
  Pixel Data Bit 2	D4	IO34
  Pixel Data Bit 3	D5	IO5