Out Of Stock
Description
The fan Module consists of a small connected motor and an L9110 chip. It can be used to create a firefighter robot or any other application that requires a fan with a speed controller. To control this module using Arduino you need to connect it via 4 different connections. L9110 IC is a two-channel push-pull power amplifier that is used to drive and control motors. This chip has two TTL/CMOS compatibility, a large current driving capability, and a low output saturation voltage. It also has a built-in clamp diode that is a reverse polarity to lessen the impact of voltage spikes when driving DC motors and stepper motors. Each channel can deliver 750–800mA of continuous current and 1.5–2.0A of peak current.
Specifications:
- Product size: 50*26*15mm
- The wings of the fan are made of plastic
- Fan diameter: 75 mm
- Working voltage: 5V
- Driver Chip: L9110 drive,
- hole, compatible with the steering wheel of the steering gear
- Strength: It can easily blow out the lighter flame of 20cm and can be used for the production of firefighting robots.
Pinout of the Module:
| NAME | DESCRIPTION |
| GND | Ground. |
| VCC |
The supply voltage of +5 V.
|
| INA |
The rotation control when connected to the ground.
Retraction. |
| INB |
The rotation control when connected to the ground.
|
Package Includes:
- 1 x L9110 Fan Motor Module
- 1 x Propeller 75mm