AED 200.00
1
Description
The Arduino MKR1000 with Headers combines the features of the Arduino Zero and the Wi-Fi Shield, providing a powerful platform for IoT applications. Designed for makers with minimal networking experience, it is an excellent choice for easily building smart, connected projects. With pre-soldered headers, it’s ready to integrate into your projects right out of the box.
Features
- Powerful 32-bit ARM Cortex-M0+ Processor
Equipped with the SAMD21 microcontroller, offering low power consumption and reliable performance. - Integrated Wi-Fi Connectivity
Features the WINC1500 module for low-power, IEEE 802.11 b/g/n wireless connectivity. - Secure Communication
Built-in ECC508 crypto authentication ensures data security for IoT applications. -
Rich I/O Options
- 20 digital I/O interfaces (12 support PWM)
- 7 analog inputs and 1 analog output for diverse sensor integration.
- Onboard Li-Po Charging Circuit
Simplifies power management for portable IoT devices. - Compact Design
Small form factor ideal for embedded projects while offering robust functionality.
Specifications
- Microcontroller: SAMD21 Cortex-M0+ 32-bit ARM MCU
- Wi-Fi Module: WINC1500 2.4 GHz IEEE 802.11 b/g/n
- Operating Voltage: 3.3 V
- Input Voltage: 5 V
- Current Draw: DC 7 mA (I/O)
- Flash Memory: 256 KB
- SRAM: 32 KB
- Crypto Authentication: ECC508
- Antenna: Single 1x1 stream PCB aerial
- Oscillator: 48-MHz crystal
- I/O Ports: 20 digital (12 with PWM), 7 analog inputs, 1 analog output
- Connectivity: Micro USB
- Integrated Battery Support: Li-Po charging circuit
Applications
- IoT (Internet of Things) projects
- Home automation systems
- Environmental monitoring
- Wearable devices
- Remote sensing and control applications
- Educational and prototyping projects
Pinout:
| Pin | Function | Description |
| VIN | Power Input |
Input voltage for external power source (5V DC).
|
| 3.3V | Power Output |
Regulated output voltage (max 50 mA).
|
| GND | Ground |
Common ground connection for power and signal.
|
| VCC | Power Input/Output |
Voltage provided via USB or an external power source.
|
| D0–D7 | Digital I/O |
General-purpose digital input/output pins.
|
| D8–D13 | Digital I/O with PWM |
Digital pins capable of PWM output.
|
| A0–A6 | Analog Input |
Input pins for reading analog signals.
|
| A7 | Analog Output |
Single analog output pin.
|
| SCL | I2C Clock |
Clock line for I2C communication.
|
| SDA | I2C Data |
Data line for I2C communication.
|
| RX | UART Receive |
Serial communication receive pin.
|
| TX | UART Transmit |
Serial communication transmit pin.
|
| USB | Micro USB Connection |
USB port for programming and power.
|
| Li-Po | Battery Connector |
Connector for a Li-Po battery with onboard charging support.
|
| RESET | Reset Pin |
Resets the board.
|
| SWDIO | Debugging Interface (SWDIO) |
Used for ARM debugging.
|
| SWCLK | Debugging Clock (SWCLK) |
Clock signal for ARM debugging.
|
Package Includes
- 1 x Arduino MKR1000 with Headers