Home Shop About Us Contact Us
|
Electronics

Transistor PNP A1015

AED 1.05

1

Description

A1015 is a low-cost good quality PNP transistor that is mainly designed to use as an audio amplifier or in audio amplification stages. The max collector to emitter voltage of the transistor is 50V therefore it can easily be used in circuits operating under 50V. For good performance, it is recommended to use the transistor in circuits operating under 40V DC. The max collector dissipation of the transistor is 400mW and the max DC current gain is 400 which makes this transistor a better device for small audio amplification. Moreover, it can also be used as a switch and it can handle 150mA of the load.


Where We Can Use it & How to Use

As mentioned above A1015 mainly manufactured for audio amplification purposes so it can be used as a small audio amplifier at the output of most audio devices like doorbells, mp3 players, radios, etc to drive a speaker. Other than that it can also be used in the stages of audio amplifier circuits. When using as a switch it can drive relays, LEDs, high power transistors, ICs, and other components in electronic circuits.


Applications

Audio Preamplifiers Circuits

Audio Amplifier Circuits

Audio amplification Stages

Switching Loads under 150mA


How to Safely Long Run in a Circuit

To get long term and stable performance from this transistor in your circuits always stay under its maximum specification values like do not drive load more than 150mA, do not operate load more than 50V DC (for good performance stay below 40V DC). Always use a suitable base resistor. A base resistor limits the extra amount of current going into the base of the transistor. always operate the transistor under 125 Celsius and store it in temperature above -65 Celsius and below +150 Celsius.