Tags: ESP32, Camera, OV2640, Module, Development, Board, Type-C,

ESP32 Camera OV2640 Module Development Board Type-C

  • 200.00 AED
    • Ex Tax:200.00 AED
    • Product Code:
    • Availability: In Stock
    ESP32CAM is a development board for image recognition. It features an ESP32(4M Flash + 520K RAM) chip and a 2-Megapixel camera(OV2640). It also supports image transmission via Wi-Fi and debugging through USB Type-C port.The hardware comes preloaded software, programmed by ESP-IDF. It is an appl..

    ESP32CAM is a development board for image recognition. It features an ESP32(4M Flash + 520K RAM) chip and a 2-Megapixel camera(OV2640). It also supports image transmission via Wi-Fi and debugging through USB Type-C port.

    The hardware comes preloaded software, programmed by ESP-IDF. It is an application to run a Wi-Fi camera. The output image is size 600*800 since it's a 2-Maga camera, you sure can optimize the software to output the maximum size of photos.

    what this software can do?

    • Power the board via USB type-C or GROVE
    • Use your phone to Wi-Fi scan an AP name start with 'm5stack-' and click to connect this AP.
    • Open up the web browser on your phone and visit 192.168.4.1
    • Then here comes the picture. Video is about 5-6 frames per second. not super fast.

    The hardware also comes with some reserved weld pad, just If you won't put these chips back on board.

    • 9-axis gyroscope (MPU6050)
    • pressure sensor (BME280)
    • analog MIC (SPQ2410)
    • Lipo Battery power pins

    Product Features:

    • ESP32 specifications
      • Dual-core Tensilica LX6 microprocessor
      • Up to 240MHz clock frequency
      • 520KB internal RAM
      • 4MB Flash memory
      • Integrated 802.11 BGN WiFi transceiver
      • Integrated dual-mode Bluetooth (classic and BLE)
      • Hardware-accelerated encryption (AES, SHA2, ECC, RSA-4096)
    • CP2104 USB TTL
    • ESP32 chipset + 3D Antenna
    • OV2640 sensor
      • Output Formats(8-bit):
        • YUV(422/420)/YCbCr422
        • RGB565/555
        • 8-bit compressed data
        • 8-/10-bit Raw RGB data
      • Maximum Image Transfer Rate
        • UXGA/SXGA: 15fps
        • SVGA: 30fps
        • CIF: 60fps
      • Scan Mode: Progressive
    • Camera specifications
      • Field of View: 65 degree
      • Maximum Pixel: 2M
    • Size: 20.5 × 46.5 × 11.5mm
    • Product Size: 46.5mm x 19.5mm x 11.7mm
    • Product weight: 6.3g

    Package Include:

    • 1x ESP32CAM Unit
    • EasyLoader

       

      1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader.


      2. After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click "Burn" to start burning.

      3. The CP210X (USB driver) needs to be installed before the EasyLoader is a burner.

      Pins Map:

      Camera Interface PinMap

      InterfaceOV2640 PinESP32Cam
      SCCB ClockSIOCIO23
      SCCB DataSIODIO25
      System ClockXCLKIO27
      Vertical SyncVSYNCIO22
      Horizontal ReferenceHREFIO26
      Pixel ClockPCLKIO21
      Pixel Data Bit 0D2IO17
      Pixel Data Bit 1D3IO35
      Pixel Data Bit 2D4IO34
      Pixel Data Bit 3D5IO5

    For Windows

    1.Install the USB driver

    Download the SiLabs CP2104 Driver

    Choice the version of the USB driver according to your windows version(Windows7/8/10).

    Choice the right version installer(x64/x86), and install it.

      

    2. Check port on Windows

    Check the list of identified COM ports in the Windows Device Manager. Disconnect your board and connect it back, to verify which port disappears from the list and then shows back again.

    Figures below show serial port for M5Stack Core board


    There are no reviews for this product.

    Write a review

    Please login or register to review