Tags: MQ6, Gas, Sensor, Module, Petroleum, Isobutane, Propane

MQ 6 Gas Sensor Module (Petroleum Isobutane Propane )

  • 19.00 AED
    • Ex Tax:19.00 AED
    • Product Code: MQ
    • Availability: In Stock
    This is a simple-to-use MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm.This sensor has high sensitivity and fast response ti..

    This is a simple-to-use MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm.

    This sensor has high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.

    Sensitive material of the MQ-6 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exists, The sensor’s conductivity is higher along with the gas concentration rising. Please use simple electro circuit, Convert change of conductivity to the corresponding output signal of gas concentration.

    MQ-6 gas sensor has a high sensitivity to Propane, Butane, and LPG, also the response to Natural gas. The sensor could be used to detect different combustible gas, especially Methane, it is with low cost and suitable for different application.

    Application
    1. The domestic gas leakage detector
    2. Industrial Combustible gas detector
    3. Portable gas detector

      Pin Configuration

      • MQ-6 Gas Sensor Pinout


      • Pin No:

        Pin Name:


        For MQ6 Sensor Module

        1

        Vcc

        This pin powers the module, typically the operating voltage is +5V

        2

        Ground

        Used to connect the module to system ground

        3

        Digital Out

        You can also use this sensor to get digital output from this pin, by setting a threshold value using the potentiometer

        4

        Analog Out

        This pin outputs 0-5V analog voltage based on the intensity of the gas 


        For MQ6 Sensor


        1

        H -Pins

        Out of the two H pins, one pin is connected to supply and the other to the ground

        2

        A-Pins

        The A pins and B pins are interchangeable. These pins will be tied to the Supply voltage.

        3

        B-Pins

        The A pins and B pins are interchangeable. One pin will act as output while the other will be pulled to the ground.


        Features of MQ6 Gas sensor


        • Operating Voltage is +5V
        • Can be used to detect LPG or Butane gas
        • Analog output voltage: 0V to 5V
        • Digital Output Voltage: 0V or 5V (TTL Logic)
        • Preheat duration 20 seconds
        • Can be used as a digital or analog sensor
        • The Sensitivity of Digital pin can be varied using the potentiometer

      There are no reviews for this product.

      Write a review

      Please login or register to review