Tags: Hall, Effect, Magnetic, Sensor, Module, Ky, 035

Hall Effect Magnetic Sensor Module Ky-035

  • 5.00 AED
    • Ex Tax:5.00 AED
    • Product Code:
    • Availability: In Stock
    KY-035 is an analog magnetic field sensor module. The strength of the field is given by an analog voltage at the signal pin of the module KY-035. The sensor is connected to gnd and 5V of the Arduino board. The output voltage is measured by analog pin A5 on the Arduino board. The example program mea..

    KY-035 is an analog magnetic field sensor module. The strength of the field is given by an analog voltage at the signal pin of the module KY-035. The sensor is connected to gnd and 5V of the Arduino board. The output voltage is measured by analog pin A5 on the Arduino board.

    The example program measures the output voltage of the sensor en presents the measured value in the serial monitor of the Arduino.

    The led on the board flashes in a speed depending on the strength of the magnetic field. With a small magnet this can be demonstrated.

    Connecting to the Arduino

    • Pin - = GND, connect to GND of the Arduino
    • Pin (middle pin) +5 V, connect to Arduino +5 V
    • Pin S signal, connect to Arduino pin A5
    • Power consumption sensor, 8 mA

    Example Code

    /* 
    KY-035 Hall analog sensor 
    */ 
    int sensorPin = A5; // select the input pin 
    int ledPin = 13; // select the pin for the LED 
    int sensorValue = 0; // variable to store the value coming from the sensor 
    void setup () { 
    pinMode (ledPin, OUTPUT); 
    Serial.begin (9600); 
    } 
    void loop () { 
    sensorValue = analogRead (sensorPin); 
    digitalWrite (ledPin, HIGH); 
    delay (sensorValue); 
    digitalWrite (ledPin, LOW); 
    delay (sensorValue); 
    Serial.println (sensorValue, DEC); 
    }

    There are no reviews for this product.

    Write a review

    Please login or register to review