Tags: Accelerometer, Sensor, 3, 5v, Gy, bmi160, 6dof, 6, axis, Rate, Gyro, Gravity,

Accelerometer Sensor 3-5v Gy-bmi160 6dof 6-axis Rate Gyro Gravity

  • 27.00 AED
    • Ex Tax:27.00 AED
    • Product Code:
    • Availability: In Stock
    The module uses Bosch\'s new BMI160 6-axis inertial motion sensor in a MEMS sensor package that integrates the top 16-bit 3-axis accelerometer with an ultra-low-power 3-axis gyroscope. The module can output acceleration data (acceleration values detected by the device in the X, Y, and Z directions) ..
    The module uses Bosch\'s new BMI160 6-axis inertial motion sensor in a MEMS sensor package that integrates the top 16-bit 3-axis accelerometer with an ultra-low-power 3-axis gyroscope. The module can output acceleration data (acceleration values detected by the device in the X, Y, and Z directions) and gyroscope data (the speed at which the device rotates around the X, Y, and Z axes). When accelerometers and gyroscopes operate in full-speed mode, typical power consumption is as low as 950μA, which is only 50% or less of the power consumption of similar products on the market.
    Designed for smartphones, tablets, and wearable devices, the Bosch BMI160 includes a built-in smart step counter algorithm that reads the number of steps directly through the registers. The built-in 3-axis acceleration and 3-axis gyroscope enable motion detection such as running and fitness. Module built-in LDO power management chip, VIN supports 3.2~6V wide voltage supply, also has a separate 3.3V interface, compatible with Arduino 3.3V and 5V controller direct drive.

    Application 

    1. Walking step 2. Acceleration detection 3. Inclination measurement 4. Display screen switching horizontal / vertical mode
    Technical specifications
    Working voltage: 3.2V~6V
    Current consumption: <1mA
    Interface mode: 2.54 pitch pin header
    Acceleration optional ruler: ±2g/±4g/±8g/±16g
    Gyro optional scale: ±125°/s, ±250°/s, ±500°/s, ±1000°/s, ±2000°/s
    Accelerometer zero drift: ±40mg
    Gyroscope zero drift: ±10°/s
    Programmable frequency: 25/32Hz~1600Hz
    6D detection and positioning
    16-bit data output
    Impact resistance: 10,000 gx 200μs
    2 independent programmable interrupt generators
    Built-in 1024 byte FIFO
    Working temperature: -40 ° C ~ +85 ° C

    There are no reviews for this product.

    Write a review

    Please login or register to review