Tags: RASPBERRY, PI, 3, MODEL, B+, Plus, 1.4Ghz, processor, Development, Board

Raspberry Pi 3 Model B+ Development Board

  • 149.00 AED
    • Ex Tax:149.00 AED
    • Brands Raspberry Pi
    • Product Code: RPi3+
    • Availability: Out Of Stock
    Model B+ is the latest product in the Raspberry Pi 3 range.The maximum CPU clock for the B+ is 200MHz higher than the previous version and the wired and wireless network throughput is three times that of the previous version. Those higher levels of performance can also be sustained for muc..


    Model B+ is the latest product in the Raspberry Pi 3 range.

    The maximum CPU clock for the B+ is 200MHz higher than the previous version and the wired and wireless network throughput is three times that of the previous version. Those higher levels of performance can also be sustained for much longer periods of time than the previous version.

    Raspberry Pi says the latest version of the board is built around BCM2837B0, an updated version of the 64-bit Broadcom APU. That chip has power integrity optimizations and an integrated heat spreader. These improvements are what allows the device to operate at higher clock frequencies or to run at lower voltages. Improved accuracy for monitoring and controlling the temperature of the chip is also integrated.

    The dual-band wireless LAN and Bluetooth are possible thanks to a Cypress CYW43455 combo chip that is connected to a Proant PCB antenna said to be similar to what was used on the Raspberry Pi Zero W. Raspberry Pi says that wireless chip delivers "somewhat" better performance in the 2.4GHz band and "far better" performance in the 5GHz band. The wireless components are under a metal heatshield, seen in the upper left corner of the board embossed with the Raspberry Pi logo.

    • Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
    • 1GB LPDDR2 SDRAM
    • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
    • Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
    • Extended 40-pin GPIO header
    • Full-size HDMI
    • 4 USB 2.0 ports
    • CSI camera port for connecting a Raspberry Pi camera
    • DSI display port for connecting a Raspberry Pi touchscreen display
    • 4-pole stereo output and composite video port
    • Micro SD port for loading your operating system and storing data
    • 5V/2.5A DC power input
    • Power-over-Ethernet (PoE) support (requires separate PoE HAT)


    pi network

    TO GET STARTED YOU’LL NEED:

    • A micro SD card with NOOBS (see Software & OS tab)
    • A high-quality 2.5A micro USB power supply, 


    There are no reviews for this product.

    Write a review

    Please login or register to review