Tags: BLE, 5.0, Bluetooth, 4, , NRF, Bluetooth, nRF52840, MDK, USB, Dongle

Bluetooth nRF52840 MDK USB Dongle

  • 99.00 AED
    • Ex Tax:99.00 AED
    • Brands Seeed
    • Product Code: Bluetooth USB
    • Availability: In Stock
    The nRF52840 Micro Dev Kit USB Dongle is a small and low-cost development platform enabled by the nRF52840 multi-protocol SoC in a convenient USB dongle form factor.The nRF52840 Micro Dev Kit USB Dongle features a programmable user button, RGB LED, up to 12 GPIOs and 2.4G Chip antenna on board.The U..

    The nRF52840 Micro Dev Kit USB Dongle is a small and low-cost development platform enabled by the nRF52840 multi-protocol SoC in a convenient USB dongle form factor.

    The nRF52840 Micro Dev Kit USB Dongle features a programmable user button, RGB LED, up to 12 GPIOs and 2.4G Chip antenna on board.

    The USB Dongle can be used as a low-cost Bluetooth5/Tread/802.15.4/ANT/2.4GHz multi-protocol node or development board. Alternatively, the USB Dongle can be used as a Network Co-Processor(NCP) with a simple connection to a PC or other USB enabled device.


    Features

    • Low-cost USB dongle supporting Bluetooth LE, Thread, Zigbee, 802.15.4, ANT and 2.4GHz

    • Pre-built OpenThread NCP Firmware support

    • OpenThread Border Router support

    • Thread Network Sniffer with Wireshark


    Hardware Specification

    • Nordic nRF52840 System-on-Chip

    • ARM® Cortex®-M4F processor optimized for ultra-low power operation

    • Combining Bluetooth 5, Bluetooth Mesh, Thread, IEEE 802.15.4, ANT and 2.4GHz proprietary

    • On-chip NFC-A tag

    • On-chip USB 2.0 (Full speed) controller

    • ARM TrustZone® Cryptocell 310 security subsystem

    • 1 MB FLASH and 256 kB RAM

    • Up to 12 GPIOs available via headers

    • User-programmable Button and RGB LED

    • On-board 2.4G chip antenna

    • 3.3V regulator with 1A peak current output

    • VBUS & VIN Power-Path Management

    • Convenient USB dongle form factor

    • Breadboard-friendly with dual 10-Pin headers

    • Measures 1.65" x 0.7" x 0.16" (42mm x 18mm x 4mm) without headers soldered in


    Pinout Diagram




    There are no reviews for this product.

    Write a review

    Please login or register to review