Tags: W5500, , Ethernet, LAN, Network, Module, , projects, internet, connectivity, TECHMAZE, UAE, Leonardo, SD, Micro

Leonardo ETH with PoE - Leonardo Ethernet W5500 + Micro SD card reader/writer with PoE

  • 159.00 AED
    • Ex Tax:159.00 AED
    • Brands RobotDYN
    • Product Code: RobotDYN
    • Availability: In Stock
    The Leonardo + Ethernet (Leonardo ETH) is a microcontroller board based on the ATmega32U4 and the new W5500 TCP / IP Embedded Ethernet Controller with PoEWith a safer and more professional power regulation chip, the system can work under much more complex environments. And forget about power supply ..

    The Leonardo + Ethernet (Leonardo ETH) is a microcontroller board based on the ATmega32U4 and the new W5500 TCP / IP Embedded Ethernet Controller with PoE

    With a safer and more professional power regulation chip, the system can work under much more complex environments. And forget about power supply issues, since it work with POE power supply.

    Imported from USA

    The Leonardo + Ethernet (Leonardo ETH) is a microcontroller board based on the ATmega32U4 and the new W5500 TCP / IP
    Embedded Ethernet Controller with PoE.

    The Leonardo + Ethernet differs from the previous Ethernet board in that the ATmega32u4 has built-in USB communication,
    eliminating the need for an external USB-to-serial converter. It has 20 digital input / output pins (of which 7 can be
    used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a RJ45 connection, a micro USB connector, a
    power jack, an ICSP header, and a Reset button.

    This allows the Leonardo ETH to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC)
    serial / COM port.

    It contains everything needed to support the microcontroller - Just connect it to a computer with a USB cable or power
    it with a AC-to-DC adapter or battery to get started.

    With a safer and more professional power regulation chip, the system can work under much more complex environments. And
    forget about power supply issues, since it work with POE power supply.

    SPECIFICATION
    - Microcontroller: Atmel Atmega32u4 (Arduino Leonardo)
    - External Input Voltage Plug (recommended): 7V~20V DC
    - External Input Voltage Plug (limits): 6-23V
    - POE Input Voltage: (802.3af standard PD device)
    - Flash Memory: 32 KB (ATmega32u4) of which 4KB used by bootloader
    - SRAM: 2 KB (ATmega32u4)
    - EEPROM: 1 KB (ATmega32u4)
    - Clock Speed: 16 MHz
    - PHY: WIZnet W5500
    - PHY Clock Speed: 25MHz

    There are no reviews for this product.

    Write a review

    Please login or register to review