Tags: FLIP-FLOPS, 74HC374N, TI, OCTAL, D-TYPE, WITH, 3-STATE, OUTPUTS,

IC FLIP-FLOPS TI OCTAL D-TYPE WITH 3-STATE OUTPUTS 74HC374N

  • 6.00 AED
    • Ex Tax:6.00 AED
    • Product Code: 74HC374N
    • Availability: In Stock
    These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.The eight flip-flops of the ’HC374 devic..

    These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

    The eight flip-flops of the ’HC374 devices are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs.

    An output-enable (OE) input places the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.

    Features

    • Wide Operating Voltage Range of 2 V to 6 V
    • High-Current 3-State True Outputs Can
    • Drive Up To 15 LSTTL Loads
    • Eight D-Type Flip-Flops in a Single Package
    • Full Parallel Access for Loading
    • Low Power Consumption, 80-µA Max ICC
    • Typical tpd = 14 ns
    • ±6-mA Output Drive at 5 V
    • Low Input Current of 1 µA Max

     

    There are no reviews for this product.

    Write a review

    Please login or register to review