Tags: ESP32, CAM, wifi, board, development,

ESP32 With CAM

  • 68.00 AED
    • Ex Tax:68.00 AED
    • Brands China
    • Product Code: ESP32
    • Availability: In Stock
    [ESP32-CAM]Modle: ESP32-CAMOperating Voltage: 5VSPI Flash: 32 MbitRAM: Inter 520KB+, External 4M PSRAMBluetooth: BLuetooth 4.2 BR/EDR & BLE standardWIFI: 802.11/b/g/n/e/iPort: UART, SPI, I2C, PWMIO Port: 9Serial port rate: 115200 bpsPicture form: JPEG (only OV2640 support), BMP, GRAYSCALESpectru..


    Modle: ESP32-CAM
    Operating Voltage: 5V
    SPI Flash: 32 Mbit
    RAM: Inter 520KB+, External 4M PSRAM
    Bluetooth: BLuetooth 4.2 BR/EDR & BLE standard
    WIFI: 802.11/b/g/n/e/i
    Port: UART, SPI, I2C, PWM
    IO Port: 9
    Serial port rate: 115200 bps
    Picture form: JPEG (only OV2640 support), BMP, GRAYSCALE
    Spectrum range: 2412 -2484MHz
    Antanna: Onboard PCB Antanna 2dBi
    Security: WPA/WPA2/WPA2-Enterprise/WPS
    Operating Temperature: -20 -85 Degrees Celsius
    Storage Tepmerature: -40 -90 Degrees Celsius, <90%RH
    Transmit power:
    802.11b: 17+/-2 dBm (@11Mbps)
    802.11g: 14+/-2 dBm (@54Mbps)
    802.11n: 13+/-2 dBm (@MSC7)
    Receive Sensitivity:
    CCK, 1 Mbps: -90dBm
    CCK, 11 Mbps: -85dBm
    6 Mbps(1/2 BPSK): -88dBm
    54 Mbps (3/4 64-QAM): -70dBm
    MCS7 (65 Mbps, 72.2 Mbps): -67dBm
    The main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and a computing power of up to 600DMIPS.
    Default 32Mbit SPI Flash, 520KB SRAM
    Support SoftAP and Station mode
    Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
    Support UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.
    Support for firmware upgrade (FOTA)
    Antenna supports on-board antenna or IPEX block output
    [OV2640 Camera Module]
    The OV2640 image sensor features 2 megapixels (1632x1232 pixels)
    Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor.
    Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data.
    The product UXGA images up to 15 frames per second.
    The user can fully control the image quality, data format and transmission mode.
    High sensitivity for low-light applications
    Low voltage for embedded applications
    Standard SCCB interface, compatible with I2C interface
    RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format
    Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size
    Supports VarioPixel sub sampling mode
    Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
    ISP with noise cancellation and dead pixel compensation
    Support image scaling
    Lens loss compensation
    Saturation automatic adjustment
    Edge enhancement automatic adjustment
    Noise reduction automatic adjustment
    Sensing array 1632x1232
    Maximum format UXGA IO
    Voltage 1.7V -3.3V
    Analog voltage 2.5 -3.0V (internal LDO to power supply 1.2V)
    Power consumption TBD sleep<20muA
    Temperature operation -30 ℃ to 70 ℃
    Stable working 0 ℃ to 50 ℃
    Output format (8-bit)
    YUV / YCbCr4: 2: 2 RGB565 / 555/444
    GRB4: 2: 2 Raw RGB Data
    Optical size 1/4"
    Viewing angle 25 Degree
    Maximum rate 15fps
    SXGA sensitivity 1.3V / (Lux-sec )
    Signal to noise ratio 40dB
    Dynamic range 50 dB
    View mode Progressive electron exposure 1 line to 1247 lines
    Pixel area 2.2 mum x 2.2 mum
    Dark current 15 mV / s at 60 degC