The GT-U7 module has high sensitivity, low power consumption, miniaturization, high tracking sensitivity greatly expanded its localization coverage, in the common GPS receiver module cannot locate the place, such as the narrow urban sky, dense jungle environment, GT-U7 can high precision positioning. The module has high sensitivity, small static drift, low power consumption and light volume send 51 single-chip Arduino STM32 routines, with USB interface, you can directly use mobile phone data cable to see the positioning effect on the computer. USB directly connected to the computer, that is, with the host computer serial port function, without the need to connect to other serial modules with IPX interface, send IPX interface active antenna it uses the same chip of NEO-6M. so you can use the same codes and wiring just pay attention for the names of the pins.
1. size 27.6x26.6 can be straight in or choose patch (with positioning hole)
2. working voltage: 3.6V-5V (or direct USB power supply)
3. work baud rate: 9600 (self-modification)
4., with IPEX antenna interface, the default distribution of active antenna, can be quickly positioned
5. board rechargeable button cell
6. onboard E2PROM allows you to save parameter data
The 7.NEMA output format is compatible with NEO-6M
Handheld devices such as PDA,
Mobile phones, camcorders, and other mobile positioning systems
Shared mobile power
Tutorial For GPS Module GT-U7 with NEO-6M:
Global Positioning System ( GPS ) is a system for determining location/position on the surface of the earth with the help of synchronizing satellite signals. This system uses 24 satellites that send microwave signals to Earth. This signal is received by the receiver on the surface and is used to determine location, speed, direction, and time.
GPS Tracker or often referred to as GPS Tracking is AVL (Automated Vehicle Locator) technology that allows users to track the position of vehicles, fleets or cars in a Real-Time state. GPS Tracking utilizes a combination of GSM and GPS technology to determine the coordinates of an object, then translate it in the form of digital maps. - Wikipedia
In this tutorial, I will test the NEO-6M or GT-u7 GPS Module, the Arduino GPS module which is now commonly found in Our Website. The following are the forms of the GPS module components:
DOWNLOAD THE LIBRARY
After it has been confirmed that the circuit is connected properly and safely, then please upload the following program, but if an error occurs, please download first and install the required library, the link is above.