AED 12.00
1
Description
The SPP-C Bluetooth module is a wireless data transmission solution, specifically designed for applications that require Bluetooth communication. Operating on the V2.1+EDR Bluetooth version, this module supports the Serial Port Profile (SPP) Bluetooth protocol and features UART interface capabilities. With its low cost, small form factor, high transmit/receive sensitivity, low power consumption, and minimal external component requirements, the SPP-C module offers a compelling solution for various wireless communication applications.
Specifications:
- Bluetooth Chip: BK3231
- Communication Protocol: Bluetooth Specification v2.1+EDR
- Radius: Up to 10 meters (power level 2)
- Integrated PCB Antenna
- Compatibility: Compatible with all Bluetooth adapters that support SPP
- Radiofrequency: 2.40 - 2.48 GHz
- Host Interface: UART
- Power Consumption During Data Transfer: 40 mA
- Operation Voltage: 2.8 V to 3.6 V
- Sensitivity: -88dBm for 1 Mbps mode and 2 dBm transmit power
- HID Support: HID v1.0
- Crystal Reference Clock: 16 MHz
- Package: 56-pin QFN 7mmx7mm package for keyboard
Module Configuration:
- UART Speed: 9600 baud (8 data bits, no parity, stop bit (8N1))
- Factory Password: 1234
- Operation Mode: Only works in Slave mode
- Power Supply: 3.3 V (Level converter required when used with a 5V data line)
Pinout:
- TX, RX: UART Interface
- NC: Reserved
- P00… P45: Programmable Input/Output Port
- RESET: Reset Line
- 3.3 V: Power Supply
- GND: Ground
AT Commands:
- AT commands should be accompanied by CRNL characters (carriage return and line feed).
- The module transitions to the AT command mode immediately after power-up, switching to data transmission mode after connecting to a Bluetooth device.
Pinout:
Package Includes:
1 x BK3231 SPP-C Bluetooth module