Current + Volt

Showing 1 to 7 of 7 (1 Pages)
ACS712 20A Hall Current Sensor Module for Arduino

techmaze

ACS712 20A Hall Current Sensor Module for Arduino

19.00 AED

Ex Tax: 19.00 AED

ACS712 20A Current Sensor InfoACS712 20A Current Sensor is a current sensing board based on Allegro’s ACS712 magnetic linear current sensor IC. ACS712 can sense current up to bidirectional 20A with lower than 5% error. The sensor’s output is analog voltage(100mV/A).ACS712 20A Current Sensor&nbs..

ACS712 30A Hall Current Sensor Module for Arduino

techmaze

ACS712 30A Hall Current Sensor Module for Arduino

19.00 AED

Ex Tax: 19.00 AED

Reading Sensing and Controlling current flow is a requirements in a wide variety of application including, over-current protection circuits, switching mode, battery chargers, power supplies, digital watt meter and programmable current source, etc.. The ACS721 current reading module is based on ACS71..

ACS712 5A Current Sensor Module for Arduino
sale-24%

ACS712 5A Current Sensor Module for Arduino

19.00 AED

25.00 AED

Ex Tax: 19.00 AED

The current sensor chips: ACS712ELC-20A Pin 5V power supply, on-board power indicator The module can be measured plus or minus 20 amps, corresponding to the analog output of 100 mV/A There is no the detection current through, the output voltage is VCC/2 PCB board size: 31mm x13mm..

ACS712 TELC-05B 5A Module Current Sensor Module Fo...

techmaze

ACS712 TELC-05B 5A Module Current Sensor Module Fo...

19.00 AED

Ex Tax: 19.00 AED

ACS712TELC-05B 5A Module Current Sensor Module For ArduinoThe current sensor model : ACS712ELC5v power supply, Onboard power light indicatorModule can measure +5 or -5 current, corresponding to the analog output of 185 mv/AWhen no current through the test, the output voltage is the VCC/ 2Size of the..

ACS712T 20A Current Sensor Module for Arduino

ACS712T 20A Current Sensor Module for Arduino

25.00 AED

Ex Tax: 25.00 AED

The current sensor chips: ACS712ELC-20AThe module can measure the positive and negative 20 amps, corresponding to the analog output 66mV / APin 5V power supply, on-board power indicatorUsing gold plated circuit boardsNo test current through the output voltage is VCC / 2Size: 31 x 13mmNote: ACS7..

Current Sensor Module MAX471

China

Current Sensor Module MAX471

11.00 AED

Ex Tax: 11.00 AED

The MAX471 is a solid alternative to an ACS712 for measuring DC Current.   Its a high side device that is powered by a load source that can range anywhere from 3 to 36 VDC.   That said, a key benefit is its scale factor as it outputs 1 volt per amp measured.This tutorial wil..

Voltage Sensor Standard  Module  for Arduino

techmaze

Voltage Sensor Standard Module for Arduino

5.00 AED

Ex Tax: 5.00 AED

This sensor is able to measure a voltage up to 25V when it's powered by 5V supply. The module also includes convenient screw terminals for easy and secure connection of a wire.This module is based on principle of resistive voltage divider design, can make the red terminal connector input voltag..

Showing 1 to 7 of 7 (1 Pages)