Relays

Showing 1 to 23 of 23 (1 Pages)
IRF520 MOS Driver Module For Arduino/ARM/Raspberry...

techmaze

IRF520 MOS Driver Module For Arduino/ARM/Raspberry...

19.00 AED

Ex Tax: 19.00 AED

When you need to control a device with a secondary power source from your low voltage micro-controller, you need something like this device. The basic principal is a small control voltage can provide and control higher voltage requirements of external devices like LED light strips, etc. via the MOSF..

Relay 1 Channel 12v module

China

Relay 1 Channel 12v module

15.00 AED

Ex Tax: 15.00 AED

Channel Relay 1 road relay module 12v low level trigger relay expansion board have a single way 1 Channel Relay the module complies with international safety standards, the control area and the load region isolation trench; with the power supply and relay instructions, pull off, disconnect..

Relay 2 Channel Module Board 5V with Optocoupler
sale-21%

techmaze

Relay 2 Channel Module Board 5V with Optocoupler

15.00 AED

19.00 AED

Ex Tax: 15.00 AED

Be able to control various appliances, and other equipment with large currentCan be controlled directly by microcontroller (Arduino UNO, MEGA, PRO, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)5V 2-Channel Relay interface board, each relay needs 50 - 60 mA Driver CurrentEquipped with high-curren..

Relay 4 Channel 5V Module Bord RobotDyn with Optoc...

RobotDyn

Relay 4 Channel 5V Module Bord RobotDyn with Optoc...

26.00 AED

Ex Tax: 26.00 AED

With this  Relay module,  will have the ability to control  high voltage and current appliances, a with a current no more than,10A (250VAC/60VDC).It can be controlled directly by microcontroller: Raspberry, Arduino, AVR, PIC, DSP, ARM or TTL logic.For control of module need ..

Relay 5v , 10A 240V AC 5A 24V DC

Relay 5v , 10A 240V AC 5A 24V DC

6.00 AED

Ex Tax: 6.00 AED

A relay is an electromagnetic switch operated by a relatively small electric current that can turn on or off a much larger electric current. The heart of a relay is an electromagnet (a coil of wire that becomes a temporary magnet when electricity flows through it). You can think of a relay as a kind..

Relay Module 1 Channel 5V DC Solid State Low Level

China

Relay Module 1 Channel 5V DC Solid State Low Level

12.00 AED

Ex Tax: 12.00 AED

5V solid state relay 240V 2A, output with resistive fuse 240V 2ASize: 24*32*21mm/0.94*1.25*0.82”Input Power: 5V DC (160mA)Input control signal voltage:(0-2.5V state low relay OFF)(3-5V state high relay ON)Input section:DC +: positive power supply (by relay voltage power supply)DC-: connect powe..

Relay Module Board 1 Channel 5V

China

Relay Module Board 1 Channel 5V

7.00 AED

Ex Tax: 7.00 AED

can be used as microcontroller development board module can be used as home appliance control5 V-12V to TTL control signal the control signal DC or AC , 220V AC load can be controlled . there is a normally open and one normally closed contact a power indicator light a control ind..

Relay Module Board 1 Channel 5V Low Level Trigger
sale-29%

techmaze

Relay Module Board 1 Channel 5V Low Level Trigger

5.00 AED

7.00 AED

Ex Tax: 5.00 AED

Be able to control various appliances and other equipment with large currentCan be controlled directly by microcontroller (Arduino UNO, MEGA, PRO, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)5V 1-Channel Relay interface board needs 50 - 60 mA Equipped with high-current relays, AC250V 10A ;..

Relay Module Board 16 Channel 5V with Optocoupler

techmaze

Relay Module Board 16 Channel 5V with Optocoupler

79.00 AED

Ex Tax: 79.00 AED

Be able to control various appliances, and other equipment with large current  Can be controlled directly by microcontroller (Arduino UNO, MEGA, PRO, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).5V 16-Channel Relay interface board, each relay needs 50 - 60 mA Driver Current and E..

Relay Module Board 2 Channel 5V with Optocoupler

RobotDyn

Relay Module Board 2 Channel 5V with Optocoupler

26.00 AED

Ex Tax: 26.00 AED

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). It can be controll..

Relay Module Board 4 Channel 5V with Optocoupler
sale-24%

techmaze

Relay Module Board 4 Channel 5V with Optocoupler

19.00 AED

25.00 AED

Ex Tax: 19.00 AED

This is a 5V 4-channel relay interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliances and equipment with large current. It is equiped with high-current relays that work under AC250V 10A or DC30V 10A. It has a standard interface that can be contro..

Relay Module Board 8 Channel 5V with Optocoupler

techmaze

Relay Module Board 8 Channel 5V with Optocoupler

55.00 AED

Ex Tax: 55.00 AED

This is a 5V 8-channel relay interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliances and equipment with large current. It is equiped with high-current relays that work under AC250V 10A or DC30V 10A. It has a standard interface that can be contro..

Relay Module Board 8 Channel 5V with Optocoupler

techmaze

Relay Module Board 8 Channel 5V with Optocoupler

55.00 AED

Ex Tax: 55.00 AED

It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as for Arduino, AVR, PIC, ARM, PLC, etc. Be able to control various appliances, and other equipment with large current This relay module is 5V active low.The 8 channel relay ..

Relay Module from RobotDyn 1 channel relay, 5V

RobotDyn

Relay Module from RobotDyn 1 channel relay, 5V

12.00 AED

Ex Tax: 12.00 AED

With this Relay module,  will have the ability to control  high voltage and current appliances, with a current no more than10A (250VAC/60VDC).It can be controlled directly by microcontroller: Raspberry, Arduino, AVR, PIC, DSP, ARM or TTL logic.For control of module need powe..

Relay Module from RobotDyn 8 channel relay, 5V

RobotDyn

Relay Module from RobotDyn 8 channel relay, 5V

45.00 AED

Ex Tax: 45.00 AED

With this Relay module,  will have the ability to control  high voltage and current appliances, with a current no more than 10A (250VAC/60VDC). It can be controlled directly by microcontroller: Raspberry, Arduino, AVR, PIC, DSP, ARM or TTL logic. For control of module n..

Relay Module Timer Adjustable Delay NE555 DC 12V

China

Relay Module Timer Adjustable Delay NE555 DC 12V

9.00 AED

Ex Tax: 9.00 AED

Chip: NE555Dimension: 68mmX21mmWorking Voltage: DC 12VFeature:the relay time delay and power supply is connecteddelay time is adjustable, (0 ~ 10 seconds)add potentiometer can increase delay timeadd capacitor C1 can increase latency timewith input power lightwith relay and indicator lampcan control ..

Relay RobotDyn Power Module 1 Channel Relay, 5V, 3...

RobotDyn

Relay RobotDyn Power Module 1 Channel Relay, 5V, 3...

20.00 AED

Ex Tax: 20.00 AED

With this Relay module,  will have the ability to control  high voltage and current appliances, with a current no more than 30A (250VAC/30VDC).It can be controlled directly by microcontroller: Raspberry, Arduino , AVR, PIC, DSP, ARM or TTL logic.For control need power ..

Relay RobotDyn Power Module 2 channel relay, 5V, 3...

RobotDyn

Relay RobotDyn Power Module 2 channel relay, 5V, 3...

25.00 AED

Ex Tax: 25.00 AED

With this Relay module,  will have the ability to control  high voltage and current appliances, with a current no more than  30A (250VAC/30VDC). It can be controlled directly by microcontroller: Raspberry, Arduino , AVR, PIC, DSP, ARM or TTL logic. For control need..

Relay Shield 4 channels for arduino

RobotDyn

Relay Shield 4 channels for arduino

54.00 AED

Ex Tax: 54.00 AED

This Relay Shield for Arduino acts like a switch. It is commonly used to control anything over 5V such as lamps, water pumps and garage doors.   But interfacing with high power and AC is quite a dangerous task when building the circuitry. Relays allow for interfacing an external ..

Relay Solid State SSR DC 5V - AC 100-240V 2A

China

Relay Solid State SSR DC 5V - AC 100-240V 2A

10.00 AED

Ex Tax: 10.00 AED

SSRs (Solid State Relays) have no movable contacts. SSRs are not very different in function from mechanical relays that have movable contacts. SSRs, however, employ semiconductor switching elements, such as thyristors, triacs, diodes, and transistors. Furthermore, SSRs employ optical semiconduc..

Thyristor AC Switch from RobotDyn 3.3V/5V logic, A...

RobotDyn

Thyristor AC Switch from RobotDyn 3.3V/5V logic, A...

15.00 AED

Ex Tax: 15.00 AED

With this module, will have the ability to control  high voltage and current appliances,  thyristor module with very low on-resistance and a control voltage, that is compatible with any 3.3V or 5V micro-controller or mechanical switch.  This allows you to control high-p..

Transistor DC switch Relay from RobotDyn , 5V logi...

RobotDyn

Transistor DC switch Relay from RobotDyn , 5V logi...

15.00 AED

Ex Tax: 15.00 AED

With this  module,  you will have the ability to control  high voltage and current appliances,  If you need to control the DC power, a MOSFET is what you need.  This is a very common MOSFET with very low on-resistance and a control voltage (aka gate voltage) that i..

Transistor MOSFET DC switch Relay, 5V logic, DC 24...

RobotDyn

Transistor MOSFET DC switch Relay, 5V logic, DC 24...

30.00 AED

Ex Tax: 30.00 AED

If you need to control the DC power, a MOSFET is what you need.  This is a very common MOSFET with very low on-resistance and a control voltage (aka gate voltage) that is compatible with any 5V microcontroller or mechanical switch.  This allows you to control high-power devices with very l..

Showing 1 to 23 of 23 (1 Pages)