Power

Refine Search


Showing 1 to 48 of 59 (2 Pages)
 Alligator to USB Male Clip

China

Alligator to USB Male Clip

3.00 AED

Ex Tax: 3.00 AED

connectors are  Alligator Test ClipsAnother connector:USB MaleColor:Red and Black  they can conduct about 1 amp of current at the most.I use them to run some LED's which use up to 1 amp and that works.Batteries can use much more than 1amp depending on what sort of battery it is. ..

 breadboard Power Supply Module 3.3V 5V

breadboard Power Supply Module 3.3V 5V

10.00 AED

Ex Tax: 10.00 AED

breadboard power supply that is almost a must have on any experimental electronics workbench!Fluctuation two road independent control, can switch over to 0 V,3.3 V,5 V On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use Breadboard power supply module, compatibl..

 DC-DC Mini Converter Step down Power Supply 0.8-2...

China

DC-DC Mini Converter Step down Power Supply 0.8-2...

20.00 AED

Ex Tax: 20.00 AED

Key Specifications/Special Features:Mini 0.8-20V 3A DC-DC Converter Adjustable Step down Power Supply Module Buck Converter Description:Efficiency: 96% (Max.)Input Voltage: 4.5-28VSwitching Frequency: 1MHzOutput Ripple: Less than 30mVOutput Voltage: 0.8-20V (Adjustable)Output Current: Rated cur..

 DC-DC USB  Buck Step-Down Converter 6-24V to 5V 3...

China

DC-DC USB Buck Step-Down Converter 6-24V to 5V 3...

21.00 AED

Ex Tax: 21.00 AED

This step-down (buck) power supply module converts its input voltage of 6V to 24V to a fixed 5V USB output at up to 3A continuous output current.It is ideal for providing a regulated 5V USB output to charge your iPhone, Android phone, tablet or any other USB-powered device. It can be powered from a ..

 Relay 2 Channel Module Board  5V with Optocoupler
sale-21%

techmaze

Relay 2 Channel Module Board 5V with Optocoupler

15.00 AED

19.00 AED

Ex Tax: 15.00 AED

Be able to control various appliances, and other equipment with large currentCan be controlled directly by microcontroller (Arduino UNO, MEGA, PRO, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)5V 2-Channel Relay interface board, each relay needs 50 - 60 mA Driver CurrentEquipped with high-curren..

Battery 12v  5ah Sealed Lead Acid Battery 12v 5ah ...

China

Battery 12v 5ah Sealed Lead Acid Battery 12v 5ah ...

130.00 AED

Ex Tax: 130.00 AED

Battery  12v 5ah Sealed Lead Acid Battery 12v 5ah12V5 Ah s is a general purpose battery with 3 - 5 years in standby service or more than 400 cycles at 50% depth of discharge in cycle service...

Battery 12v 1.2Ah Sealed Lead Acid Welion RB1212bs

Battery 12v 1.2Ah Sealed Lead Acid Welion RB1212bs

70.00 AED

Ex Tax: 70.00 AED

Battery 12v 1.2Ah Sealed Lead Acid Welion RB1212bs..

Battery Charger 18650 lithium 3.7V4.2V Double Slot

China

Battery Charger 18650 lithium 3.7V4.2V Double Slot

12.00 AED

Ex Tax: 12.00 AED

18650 lithium battery charger 3.7V4.2V charger charging flashlight charger double slot . safer for lithium ion batteries charging                                       ..

Battery Holder 4 x AA With 2.1mm Barrel Plug

Battery Holder 4 x AA With 2.1mm Barrel Plug

4.50 AED

Ex Tax: 4.50 AED

Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder’s leads.The 4 x AA battery holder cas..

Battery Holder 9V

Battery Holder 9V

7.00 AED

Ex Tax: 7.00 AED

Make your Arduino projects portable with these 9V battery snaps powering your project. Standard 2.1mm x 5.5mm center positive male plug connects directly to the Arduino board. Plug Type: 2.1mm x 5.5mm Male to 9V Battery ClipCable length:6 inchesGreat to use for LED strip light or arduinoPackage..

Battery Snap 9V T Type Clip Lead Wire Connector

Battery Snap 9V T Type Clip Lead Wire Connector

3.00 AED

Ex Tax: 3.00 AED

Product Color: BlackWire Specifications:Copper wire: 7 / 0.12AS × 2C 28 tinned copper wireConventional length: 13.5cm..

Battery Snaps 9V & Contacts 9V PC Battery SNAP...

Battery Snaps 9V & Contacts 9V PC Battery SNAP...

4.00 AED

Ex Tax: 4.00 AED

9V Battery Snaps & Contacts 9V PC Battery SNAP CONNECTOR..

Breadboard Power Supply 5V/3.3V (1A)
sale-38%

RobotDyn

Breadboard Power Supply 5V/3.3V (1A)

25.00 AED

40.00 AED

Ex Tax: 25.00 AED

This breadboard power supply is a companion module, which provides 5 V, 3.3 V to rails on a solderless breadboard.It is an extremely useful facility, which provides regulated voltage rails for project circuits.The module design is the form of a plug-in, which connects onto the breadboard.This module..

DC-DC 0.9-5V to DC 5V Very Small Step-UP Boost Vol...

China

DC-DC 0.9-5V to DC 5V Very Small Step-UP Boost Vol...

18.00 AED

Ex Tax: 18.00 AED

DC-DC Boost module working frequency 150KHZ. efficiency is normal 85% .2.54mm pin pitch, Arduiuo Breadboard friendly.Operating ambient temperature : -25~+85 Degrees CelsiusExcluding Pin Size 11mm x 10.5mm x 7.5mm(Very small)Weight : about 1.2g(Very light)input voltage 0.9 ~ 5V, output 5VMaximum outp..

DC-DC Battery Charger for Lithium 18650 Li-ion Pro...

China

DC-DC Battery Charger for Lithium 18650 Li-ion Pro...

8.00 AED

Ex Tax: 8.00 AED

Charge module- Linear charging.Current- 1A adjustable.Charge precision- 1.5%.Input voltage- 4.5V-5.5V.Full charge voltage- 4.2V.Led indicator- red is charging Green is full charged.Input interface- micro USB.Work temperature- -10° to +85°.Inversed polarity- NO.Size- small to 25X19X10mm. NOTE:1...

DC-DC Battery Mini USB Li po Charging Board Module...

China

DC-DC Battery Mini USB Li po Charging Board Module...

12.50 AED

Ex Tax: 12.50 AED

Description:Item Name: Lipo battery charging boardItem NO.: TP4056Charging Method: linear chargeCharging Current: 1A AdjustableCharge Accuracy: 1.5%Input Voltage: 4.5V-5.5VFull Charge Voltage: 4.2VCharging Indicator: Blue light  lit charge,red light lit full chargeCharging Input Interface: Mini..

DC-DC Boost Converter Step Up Power Module 150W  1...

China

DC-DC Boost Converter Step Up Power Module 150W 1...

20.00 AED

Ex Tax: 20.00 AED

DIY an adjustable on-board power supply, you just input DC 12V, then you can get output DC 12V-35V (adjustable), But the output voltage can not below the input voltageDIY a booster chargerProvide power for your electronic equipmentNo Short circuit protection,Please installs the fuse or protection ci..

DC-DC Buck Converter Step Down Module LM2596

China

DC-DC Buck Converter Step Down Module LM2596

13.00 AED

Ex Tax: 13.00 AED

Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)Switching Frequency: 150KHzRectifier: Non-Synchronous Rectification Module Properties: Non-isolated step-down module (buck)Short circuit protection: current limiting, since the recovery Operating temperature..

DC-DC CC CV Lithium Battery Step down Charging Mod...

China

DC-DC CC CV Lithium Battery Step down Charging Mod...

14.00 AED

Ex Tax: 14.00 AED

This linear module has constant voltage and constant current function (CC CV). and it has a good performance.When you use it as a charger. this module use good chip as core and it is stable. also its ripple is low to 50mV.Size: 51 * 26.3 * 14 (L * W * H) (mm)Operating Temperature: -40 ° to +85 °Volt..

DC-DC Step Down Adjustable Power Supply Module Hig...

DC-DC Step Down Adjustable Power Supply Module Hig...

14.00 AED

Ex Tax: 14.00 AED

The DC/DC buck module applications the input voltage is higher than the output voltage of the buck field, such as battery, power transformer, DIY adjustable regulated power supply, 24V Vehicle notebook power supply,industrial equipment buck.12V buck to 3.3V, 12V bu..

DC-DC Step Down Power Module 800MA 5V to 3.3V  AMS...

China

DC-DC Step Down Power Module 800MA 5V to 3.3V AMS...

5.00 AED

Ex Tax: 5.00 AED

Integrated 5V linear regulator with low dropout voltage (input voltage - output voltage)AMS1117 is a series of low dropout three -terminal regulators with a dropout of 1.3V at 1A load current. AMS 1117 features a very low standby current 2mA compared to 5mA of competitor. AMS 1117 offers the..

DC-DC Step Down Power Supply AMS1117 4.5V - 7V Tur...

DC-DC Step Down Power Supply AMS1117 4.5V - 7V Tur...

5.00 AED

Ex Tax: 5.00 AED

The buck converter is a ubiquitous DC-DC converter that efficiently converts a high voltage to a low voltage efficiently. Efficient power conversion extends battery life, reduces heat, and allows for smaller gadgets to be built. The buck converter can be used in lots of cool applications.S..

DC-DC Step Up/Down Adjustable Voltmeter Buck Conve...

China

DC-DC Step Up/Down Adjustable Voltmeter Buck Conve...

25.00 AED

Ex Tax: 25.00 AED

 the most affordable, best-selling LM2596 module with voltage displayFeatures1.Input voltage range:440VDC2.Output voltage range:1.25-37VDC adjustable3.Output current:2A4.voltmeter range: 0 to 40V, error ±0.1V5.Input reverse polarity protection6.Built in output short protection function7.Built i..

DC-DC Step-up Booster Power Supply Module XL6009

China

DC-DC Step-up Booster Power Supply Module XL6009

13.00 AED

Ex Tax: 13.00 AED

XL6009 400KHz 4ASwitching current boost moduleXL6009 DC-DC Boost Module Power Module Output Adjustable Super LM2577 Regulator Module DSN6009Is a4AThe switching current boostBOOST) Module. The module is used Second generation High frequency switching technologyXL6009E1As the core chipT..

DC-DC Voltage MT3608 Boost Converter

DC-DC Voltage MT3608 Boost Converter

10.00 AED

Ex Tax: 10.00 AED

This module features the MT3608 2 Amp step up (boost) converter, which can take input voltages as low as 2V and step up the output to as high as 28V. The MT3608 features automatic shifting to pulse frequency modulation mode at light loads. It includes under-voltage lockout, current limiting, and the..

DC-DC Voltage Regulator Low Dropout  3.3V IC LM111...

DC-DC Voltage Regulator Low Dropout 3.3V IC LM111...

5.00 AED

Ex Tax: 5.00 AED

The LM1117 is a low dropout voltage regulator with a. 1• Available in 1.8 V, 2.5 V, 3.3 V, 5 V, and dropout of 1.2 V at 800 mA of load current..

High Voltage Generator DC 3.7V-7.4V to 400KV High ...
sale-33%

High Voltage Generator DC 3.7V-7.4V to 400KV High ...

20.00 AED

30.00 AED

Ex Tax: 20.00 AED

DC 3.7V-7.4V to 400KV High Voltage Generator Boost Inverter Module Features:This high-voltage generator module is based on the principle of Tesla coil.This small high efficiency module can release high-voltage pulse output with simple external circuit power supply.Ideal for students to study electri..

L7805CV Voltage Regulator IC 5V 1.5A

L7805CV Voltage Regulator IC 5V 1.5A

2.00 AED

Ex Tax: 2.00 AED

Manufacturer Part No: L7805CVPackage / Case: TO-220RoHS: YesDatasheet: Click HereSpecificationsProduct Category: Linear Voltage Regulators - StandardPolarity: PositiveNumber of Outputs: Single Output Type: FixedOutput Voltage: 5 VOutput Current: 1.5 ALine Regulation: 50 mVLoad Regulation: ..

L7812CV Voltage Regulator IC 12V 1.5A

L7812CV Voltage Regulator IC 12V 1.5A

2.00 AED

Ex Tax: 2.00 AED

Primary input voltage: 10V Fixed output voltage: 5V Voltage drop: 2V Pin Count: 3 Output Current: 1.5A Package Type: TO-220 Operating temperature range: 0 ° C to +150 ° C SVHC (SVHC): No SVHC (20-Jun-2011) Device label: 7805 Tolerance, operating voltage +: 4% Package Type: Tube Package Type: TO-220 ..

Lenovo Charger Adapter 5v 2a UK C-P64

Lenovo Charger Adapter 5v 2a UK C-P64

48.00 AED

Ex Tax: 48.00 AED

Lenovo Charger Adapter 5v 2a UK C-P64 for mobile tablet ..

Logic Level Converter Bi-Directional Module 4 Chan...

China

Logic Level Converter Bi-Directional Module 4 Chan...

5.00 AED

Ex Tax: 5.00 AED

4-way 3.3V / 5V bi-directional level conversion moduleAs part of the MCU development board and equipment is 3.3V work, but also a microcontroller development board and equipment, sensors, etc. is the 5.0V power supply, so when the two need to communicate, there is a work voltage inconsistencies, so ..

Power Supply - UK Plug 5.1V 2.5A with Switch

Power Supply - UK Plug 5.1V 2.5A with Switch

40.00 AED

Ex Tax: 40.00 AED

This 5.1V 2.5A power supply (UK Pin) with switch is perfectly suited for use with the Raspberry Pi 3 and all previous models. Tested on multiple Pi's under different loads and conditions, this quality charger delivers a stable voltage to the Pi of 4.95 to 5.15V, which sits nicely withinin the s..

Raspberry Pi Official UK & EU Power Supply - 5...
sale-18%

Raspberry Pi Official UK & EU Power Supply - 5...

45.00 AED

55.00 AED

Ex Tax: 45.00 AED

The Official Raspberry Pi Power Supply - Shipped with easily interchangeable heads for the UK and EU!  ThisPSU supports up to 2.5A of current, so it won't let you down when powering hungry devices through your Raspberry Pi 3 Model B Technical Data 5.1V 2.5A Output ..

Relay 1 Channel 12v module

China

Relay 1 Channel 12v module

15.00 AED

Ex Tax: 15.00 AED

Channel Relay 1 road relay module 12v low level trigger relay expansion board have a single way 1 Channel Relay the module complies with international safety standards, the control area and the load region isolation trench; with the power supply and relay instructions, pull off, disconnect..

Relay 4 Channel 5V  Module  Bord RobotDyn with Opt...

RobotDyn

Relay 4 Channel 5V Module Bord RobotDyn with Opt...

26.00 AED

Ex Tax: 26.00 AED

With this  Relay module,  will have the ability to control  high voltage and current appliances, a with a current no more than,10A (250VAC/60VDC).It can be controlled directly by microcontroller: Raspberry, Arduino, AVR, PIC, DSP, ARM or TTL logic.For control of module need ..

Relay 5v , 10A 240V AC  5A 24V DC

Relay 5v , 10A 240V AC 5A 24V DC

6.00 AED

Ex Tax: 6.00 AED

A relay is an electromagnetic switch operated by a relatively small electric current that can turn on or off a much larger electric current. The heart of a relay is an electromagnet (a coil of wire that becomes a temporary magnet when electricity flows through it). You can think of a relay as a kind..

Relay Module 1 Channel 5V DC Solid State Low Level...

China

Relay Module 1 Channel 5V DC Solid State Low Level...

12.00 AED

Ex Tax: 12.00 AED

5V solid state relay 240V 2A, output with resistive fuse 240V 2ASize: 24*32*21mm/0.94*1.25*0.82”Input Power: 5V DC (160mA)Input control signal voltage:(0-2.5V state low relay OFF)(3-5V state high relay ON)Input section:DC +: positive power supply (by relay voltage power supply)DC-: connect powe..

Relay Module Board 1 Channel 5V

China

Relay Module Board 1 Channel 5V

7.00 AED

Ex Tax: 7.00 AED

can be used as microcontroller development board module can be used as home appliance control5 V-12V to TTL control signal the control signal DC or AC , 220V AC load can be controlled . there is a normally open and one normally closed contact a power indicator light a control ind..

Relay Module Board 1 Channel 5V Low Level Trigger
sale-29%

techmaze

Relay Module Board 1 Channel 5V Low Level Trigger

5.00 AED

7.00 AED

Ex Tax: 5.00 AED

Be able to control various appliances and other equipment with large currentCan be controlled directly by microcontroller (Arduino UNO, MEGA, PRO, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)5V 1-Channel Relay interface board needs 50 - 60 mA Equipped with high-current relays, AC250V 10A ;..

Relay Module Board 16 Channel 5V with Optocoupler

techmaze

Relay Module Board 16 Channel 5V with Optocoupler

79.00 AED

Ex Tax: 79.00 AED

Be able to control various appliances, and other equipment with large current  Can be controlled directly by microcontroller (Arduino UNO, MEGA, PRO, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).5V 16-Channel Relay interface board, each relay needs 50 - 60 mA Driver Current and E..

Relay Module Board 2 Channel 5V with Optocoupler

RobotDyn

Relay Module Board 2 Channel 5V with Optocoupler

26.00 AED

Ex Tax: 26.00 AED

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). It can be control..

Relay Module Board 4 Channel 5V with Optocoupler
sale-24%

techmaze

Relay Module Board 4 Channel 5V with Optocoupler

19.00 AED

25.00 AED

Ex Tax: 19.00 AED

This is a 5V 4-channel relay interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliances and equipment with large current. It is equiped with high-current relays that work under AC250V 10A or DC30V 10A. It has a standard interface that can be contro..

Relay Module Board 8 Channel 5V with Optocoupler

techmaze

Relay Module Board 8 Channel 5V with Optocoupler

55.00 AED

Ex Tax: 55.00 AED

It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as for Arduino, AVR, PIC, ARM, PLC, etc. Be able to control various appliances, and other equipment with large current This relay module is 5V active low.The 8 channel relay ..

Relay Module Board 8 Channel 5V with Optocoupler

techmaze

Relay Module Board 8 Channel 5V with Optocoupler

55.00 AED

Ex Tax: 55.00 AED

This is a 5V 8-channel relay interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliances and equipment with large current. It is equiped with high-current relays that work under AC250V 10A or DC30V 10A. It has a standard interface that can be contro..

Relay Module from RobotDyn  1 channel relay, 5V

RobotDyn

Relay Module from RobotDyn 1 channel relay, 5V

12.00 AED

Ex Tax: 12.00 AED

With this Relay module,  will have the ability to control  high voltage and current appliances, with a current no more than10A (250VAC/60VDC).It can be controlled directly by microcontroller: Raspberry, Arduino, AVR, PIC, DSP, ARM or TTL logic.For control of module need powe..

Relay Module from RobotDyn  8 channel relay, 5V

RobotDyn

Relay Module from RobotDyn 8 channel relay, 5V

45.00 AED

Ex Tax: 45.00 AED

With this Relay module,  will have the ability to control  high voltage and current appliances, with a current no more than 10A (250VAC/60VDC). It can be controlled directly by microcontroller: Raspberry, Arduino, AVR, PIC, DSP, ARM or TTL logic. For control of module n..

Relay RobotDyn Power Module 1 Channel Relay, 5V, 3...

RobotDyn

Relay RobotDyn Power Module 1 Channel Relay, 5V, 3...

20.00 AED

Ex Tax: 20.00 AED

With this Relay module,  will have the ability to control  high voltage and current appliances, with a current no more than 30A (250VAC/30VDC).It can be controlled directly by microcontroller: Raspberry, Arduino , AVR, PIC, DSP, ARM or TTL logic.For control need power ..

Relay RobotDyn Power Module 2 channel relay, 5V, 3...

RobotDyn

Relay RobotDyn Power Module 2 channel relay, 5V, 3...

25.00 AED

Ex Tax: 25.00 AED

With this Relay module,  will have the ability to control  high voltage and current appliances, with a current no more than  30A (250VAC/30VDC). It can be controlled directly by microcontroller: Raspberry, Arduino , AVR, PIC, DSP, ARM or TTL logic. For control ne..

Showing 1 to 48 of 59 (2 Pages)