Tags: camera, cmos, OV7670, Arduino, Raspberry pi

Camera CMOS OV7670 VGA for Arduino and Raspberry pi

  • 50.00 AED
    • Ex Tax:50.00 AED
    • Product Code: OV7670
    • Availability: In Stock
    The OV7670 Camera Module is a small image sensor, low operating voltage, providing all functions of a single chip of VGA camera and image processor. Through SCCB bus control, the sensor can output the whole frame, sampling, and various resolution 8 bits of data.  The product VGA imag..

    The OV7670 Camera Module is a small image sensor, low operating voltage, providing all functions of a single chip of VGA camera and image processor. Through SCCB bus control, the sensor can output the whole frame, sampling, and various resolution 8 bits of data.  The product VGA image can reach up to a maximum of 30 frames per second. Users can completely control the image quality, data format and transmission mode. All the process of image processing functions can through the SCCB programming interface, including gamma curve, white balance, saturation and chroma .

    OmmiVision image sensor has been in application of unique sensor technology, by reducing or eliminating the optical or electronic defect such as fixed pattern noise, tail, floating away, etc., to improve the quality of the image, and get the clear and stable color images.

    Features:
     
    1. High sensitivity for low-light operation
    2. Low operating voltage for embedded application
    3. Standard SCCB interface compatible with I2C interface
    4. With AL422 3M-Bits FIFO. 
    5. Raw RGB, RGB (GRB4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) output format.
    6. Support VGA, CIF and from CIF to 40 x 30 format
    7. Vario Pixel method for sub-sampling
    8. Auto image control: AEC, AGC, AWB, ABF, ABLC
    9. Image quality control: Color saturation, hue, gamma, sharpness and anti-blooming
    10. ISP includes noise reduction and defect correction
    11. Support image scaling
    12. Lens shading correction
    13. Flicker 50/60Hz auto detection
    14. Color saturation level auto adjust
    15. Edge enhancement level auto adjust
    16. De-noise level auto adjust
     
    Parameters:
     
    IO voltage: 2.5V to 3.0V
    Operating power: 60mW/15fpsVGAYUV
    Sleeping mode: <20μA
    Operating temperature: -30 to 70 deg C
    Output format: YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data (8 digit)
    Lens size: 1/6"
    Vision angle: 25 degree
    Max. frame rate: 30fps VGA
    Sensitivity: 1.3V / (Lux-sec)
    Signal to noise ratio: 46 dB
    Dynamic range: 52 dB
    Browse mode: By row
    Electronic exposure: 1 to 510 row
    Pixel coverage: 3.6μm x 3.6μm
    Duck current:: 12 mV/s at 60℃