Expansion

Showing 1 to 15 of 15 (1 Pages)
 Expander Port I2C 8-bit I/O Module PCA8574AD

RobotDYN

Expander Port I2C 8-bit I/O Module PCA8574AD

19.00 AED

Ex Tax: 19.00 AED

If you just don't have enough digital I/O pins on your Arduino to interface with all your sensors and controls, you might want to look at using the I2C bus to connect a few port expander chip PCA8574AD have 8 digital I/O bits and can be set to addresses 0x38-0x3F respectively.The I2C bus on the Ardu..

Data Logger Arduino Shield XD-204 (Battery Include...

techmaze

Data Logger Arduino Shield XD-204 (Battery Include...

49.00 AED

Ex Tax: 49.00 AED

Here's a handy Arduino shield: we've had a lot of people looking for a dedicated and well-designed data logging shield. We worked hard to engineer an inexpensive but well-rounded design. This shield makes it easy to add a 'hard disk' with gigabytes of storage to your Arduino! Our latest version of t..

Data Logger Shield Arduino, MicroSD-Reader + RTC (...

RobotDYN

Data Logger Shield Arduino, MicroSD-Reader + RTC (...

25.00 AED

Ex Tax: 25.00 AED

RobotDyn is a Data Logger Shield for Arduino UNO with MicroSD card reader and real-time clock integrated.Supports FAT16 and FAT32 format cards with SD card interface. With the 3.3V voltage level control on the shield, you can use it quickly and reliably without damaging your SD cards. You can r..

Expansion Multifunctional Shield learning kit

China

Expansion Multifunctional Shield learning kit

19.00 AED

Ex Tax: 19.00 AED

This is an open-source code base and Simple io platform, and with the use of a similar java, C language development environment. So you can quickly use the language with Flash or Processing ... and other software to make interactive works. Can be used to complete the development of electronic compon..

Expansion Nano I/O Shield (Assembled)

RobotDYN

Expansion Nano I/O Shield (Assembled)

29.00 AED

Ex Tax: 29.00 AED

Arduino Nano IO Expansion Shield is specifically developed for easy connection between Arduino Nano and other devices. Actually, it expands the Arduino Nano controller to link those devices in a simple free manner. It is a perfect additional of Nano controller and compatible with both Arduino Nano v..

Expansion Port Interface Support Cascading Extende...

China

Expansion Port Interface Support Cascading Extende...

9.00 AED

Ex Tax: 9.00 AED

This is the I/O extended module, which use for I2C interface, you can use two of the module to extend 8 I/O.The PCF8574 is an 8 bits I/O port expander that uses the I2C protocol. Using this IC, you can use only the SDA and SCL pins of your Arduino board to control up to 8 digital I/O ports.This 8-bi..

Expansion Sensor Shield Module For Arduino Nano (B...

Expansion Sensor Shield Module For Arduino Nano (B...

19.00 AED

Ex Tax: 19.00 AED

For Arduino Nano, IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices. In essence, it expands the Nano controller capabilities to link those devices in a simple and trouble-free manner. It is a perfect companion of Nano breadboard..

Expansion Sensor Shield Module For Arduino Nano (R...

Expansion Sensor Shield Module For Arduino Nano (R...

19.00 AED

Ex Tax: 19.00 AED

For Arduino Nano, IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices. In essence, it expands the Nano controller capabilities to link those devices in a simple and trouble-free manner. It is a perfect companion of Nano breadboard..

Expansion Shield V1 MEGA Sensor Shield for MEGA 25...

China

Expansion Shield V1 MEGA Sensor Shield for MEGA 25...

29.00 AED

Ex Tax: 29.00 AED

The board use of Immersion Gold PCB processing technology, the motherboard will not only all the digital and analog interfaces servo extended line order form out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 radio frequency module communica..

Expansion V5 Sensor Shield Board Shield For Arduin...

China

Expansion V5 Sensor Shield Board Shield For Arduin...

19.00 AED

Ex Tax: 19.00 AED

Latest Arduino sensor Shield V5.0 reserves advantages of Arduino Sensor V4.0,such as lamination design, PCB immersion god process, and main board extend all the figures and analog interfaces of Arduino controller. I2C interface, 32 steering engineer controller interface, Bluetooth module communicati..

Expansion V5.0 Sensor board Shield for UNO Black

China

Expansion V5.0 Sensor board Shield for UNO Black

9.00 AED

Ex Tax: 9.00 AED

Sensor Shield V5.0 sensor expansion boardLatest Sensor Shield V5.0 sensor expansion boardStill only uses stack design , the motherboard will not only UnoAll digital and analoginterfaces to extend out of the steering line order form , but also ad hoc IIC interface ,Servo Controller Interfac..

Keyestudio Sensor Shield V5 for Arduino

Keyestudio

Keyestudio Sensor Shield V5 for Arduino

19.00 AED

Ex Tax: 19.00 AED

In the experiments, you might often use UNO R3 control board and several sensor modules. If the interfaces of power output is not enough, you may need to add a breadboard and use many connection wires. Is it really troublesome?But now, with this keyestudio sensor shield, you can easily solve that pr..

NodeMcu v3 Basic Base Board

China

NodeMcu v3 Basic Base Board

19.00 AED

Ex Tax: 19.00 AED

This base board is designed to ease the prototyping using NodeMCU V3 board (Lolin). It extends the GPIO of NodeMCU to header pins, which also includes the Vin, VUSB, 5V, 3.3V and GND. You can further use these pins for prototyping, with the male to female jumper wires. With the on board voltage regu..

PLC Like Screwed Wings Shield for Arduino

RobotDyn

PLC Like Screwed Wings Shield for Arduino

24.00 AED

Ex Tax: 24.00 AED

Screw Wings Shield is composed of two parts for by both sides of Arduino. it is a wing-like shield that extends both sides of your Arduino or Arduino variants into sturdy and reliable screw terminal blocks. It has complete set of of 3.5mm binding post blocks and three-terminal groups (VCC,..

Raspberry Pi GPIO T-Expansion Board DIY Kit with C...

techmaze

Raspberry Pi GPIO T-Expansion Board DIY Kit with C...

19.00 AED

Ex Tax: 19.00 AED

:A useful set designed for Raspberry Pi 3B+,3B, 2B, 1B+, 1A+, Zero W and Raspberry Pi zero.Able to break out those Power, GPIO, I2C and SPI pins from the 40-Pin header onto a solderless breadboard.It composes of a 40-pin ribbon cable and a T-Shaped breakout GPIO expansion board, helps build con..

Showing 1 to 15 of 15 (1 Pages)