Tags: Motor, Control, L293D, H-Bridge, Shield, Adafruit, v1.0, 4, Channel, Arduino, Support, PWM

Motor Control L293D H-Bridge Shield Adafruit v1.0 4 Channel for Arduino Support PWM

  • 29.00 AED

    45.00 AED

    • Ex Tax:29.00 AED
    • Product Code: Motor Drivers
    • Availability: In Stock
    controlling 4 motors , or 2 DC Motors + Stepper motors or 2 stepper motors at once is not hard anymore adafruit Motor Shield is a great motor controller for Arduino, but you need to make sure it's used correctly. Please read and watch  the tutorial below.Features2 interface for 5V Ser..
    controlling 4 motors , or 2 DC Motors + Stepper motors or 2 stepper motors at once is not hard anymore adafruit Motor Shield is a great motor controller for Arduino, but you need to make sure it's used correctly. Please read and watch  the tutorial below.

    Features

    • 2 interface for 5V Servo connected to the Arduino"s high-resolution dedicated timer - no jitter.
    • Can drive 4 DC motors or 2 stepper motors or 2 Servo.
    • Up to 4 bi-directional DC motors with individual 8-bit speed selection.
    • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
    • 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 25V DC.
    • Pull down resistors keep motors disabled during power-up.
    • 2 external terminal power interface, for separate logic/motor supplies.
    • Tested compatible for Arduino Mega, Diecimila and Duemilanove.

    Specifications

    • Power Supply : 5VDC~36VDC
    • 4H-Bridges : Provides 0.6A(1.2A peak current )with thermal protection, per bridge
    • External Terminal power Interface : 2
    • Dimensions : 70x53x20mm
    The version of this shield in our stock is the blue DIP Version.

    adafruit_products_2237983028_b0b7144507_b.jpg

    Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. Here is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects.

    • 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!
    • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
    • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
    • 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, 4.5V to 25V
    • Pull down resistors keep motors disabled during power-up
    • Big terminal block connectors to easily hook up wires (10-22AWG) and power
    • Arduino reset button brought up top
    • 2-pin terminal block to connect external power, for seperate logic/motor supplies
    • Tested compatible with Mega, Uno
    • Download the easy-to-use Arduino software libraries and you're ready to go!
    adafruit_products_2237992158_d1be17779d_b.jpg


    In this we will see how we can control a DC Motor using a motor shield! Link for Motor shield library: https://goo.gl/fScTIj Link for codes: https://goo.gl/3Z6fEK