Tags: classic, mega, 2560, r3, pl2303tqfn, atmega2560, usb, b

Classic Mega 2560 R3 with ATmega2560-16AU USB-B

  • 63.00 AED
    • Ex Tax:63.00 AED
    • Brands RobotDyn
    • Product Code: 305
    • Availability: In Stock
    classic Mega 2560  - compatible with Arduino Mega 2560 board. Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip Prolific PL2303(16MHz).Board for functionality similar to the Arduino Mega 2560, and uses the original chips ATmega2560 (16 MHz).Classic Mega 25..

    classic Mega 2560  - compatible with Arduino Mega 2560 board. Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip Prolific PL2303(16MHz).
    Board for functionality similar to the Arduino Mega 2560, and uses the original chips ATmega2560 (16 MHz).
    Classic Mega 2560 - connects to the computer via USB-B (classic of Arduino).
    You can supply power to board through the USB-B connector or DC Barel Jack power connector. The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V (peack 18V) DC. Output current for 5V - about 800mA, for 3.3V - about 180mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.

    MicrocontrollerATmega2560USB-UART converterPL2303TQFNPower Out

    •  Classic Mega 2560 R3Mega is derived from Arduino Mega, it combines the advantage of both Arduino Mega and Classcic arduino mega r3  while the price is lower compare to Arduino Mega 2560’s price. 

      FeaturesArduino Mega
      IO Pin 
      54 
      PWM 
      14 
      Analog Pin 
      16 
      Operating Voltage5V 



      The Arduino Mega 2560 Rev3 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

      It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.


      TECHNICAL SPECIFICATION

      Microcontroller: ATmega2560

      • Operating voltage: 5V

      • Input voltage (recommended): 7-12V

      • Input voltage (limits): 6-20V

      • Digital I/O pins: 54 (of which 14 provide PWM output)

      • Analog input pins: 16

      • DC current per I/O pin: 40 mA

      • DC current for 3.3V pin: 50 mA

      • Flash Memory: 256 KB of which 8 KB used by bootloader

      • SRAM: 8 KB

      • EEPROM: 4 KB

      • Clock speed: 16 MHz